hitachi logo
Contact  |  Sitemap  |  Imprint  |  Data protection
  Broadcast Product Overview
  Fiber System | Digital Triax System | Viewfinder | Control Panels | Studio Adapter
  Fiber System (3G)

Camera Adapter

Optical serial digital transmission
(HD-SDI 3G / 1.5G)

Video Transmission System: 3G-SDI, Fully Digital, bi-directional (SMPTE 424M)
Connector: 1 x HFOC female (LEMO/Tajimi)
(SMPTE 304M)
Intercom: 2 channels, each 5-pin XLR, channel selection, MIC on/off, Volume Control
Program Audio: 2 x PGM audio level controls, Channel 1&2 intercom mix
Embedded Return Audio available as option
Power Out (for Teleprompter): 1 x 5pin, 230VAC, 60-100W, External Prompter Tally drive out (depending on configuration)
Microphone in: 2 Channels, Line or Mic level, Phantom power on/off
Return control / Aux Switch: 2 channels, 4-input remote AUX/VF (RET control)
Video Inputs/Outputs: 2 x HD-SDI (1080p, 3Gbit/s) out, 1 x Analog Prompt Out/Genlock In switchable
Other I/O: 1 x 29-pin Studio Adapter Interface, 1 x 5-pin 12VDC/1A Script Lamp Out, 1 x 5-pin VF AUX Return, 1 x 4-pin XLR 12VDC Power in
Mass: 2.2 kg (4.8lbs)
Power consumption: 14W


Camera Control Unit

Optical serial digital transmission
(HD-SDI 3G / 1.5G)

Video Outputs:
8 x HD-SDI (3G/1.5G) or 4 x Dual Link HD-SDI switchable
+ 4 x HD-SDI (3G/1.5G) or SD-SDI switchable
+ 1 x HD-SDI (3G/1.5G) or SD-SDI switchable for WFM
+ 1 x HD-SDI (3G/1.5G) or SD-SDI switchable with PIX
(character display)
Including embedded audio
Digital Returns: 2 simultaneous channels:
A: 4 x HD-SDI (3G/1.5G) or SD-SDI switchable for viewfinder
B: 2 x HD-SDI (3G/1.5G) or SD-SDI switchable for floor monitor
Genlock: B-BST or Tri-Level sync (loop-through)
Prompt in: VS or VBS (loop-through)
Mic Out: 2 x 3-pin XLR
AES/EBU Audio 1/2 BNC
Remote I/O: 2 x 4-pin (each one for RCP and MSU)
Mic Remote: 1 x D-sub 15-pin
Tally Out: 1 x D-sub 9-pin
WFM Control: 1 x D-sub 15-pin
Communication: 1 x D-sub 25-pin for Intercom / PGM Audio / R/G Tally (Intercom type: 2- or 4-wire, R/G Tally type: Contact or DC supply (24VDC, 10mA)
Trunk Data:
RS-422 or RS-232C (option): 1 x D-sub 9-pin
Network control: RJ-45 TCP/IP
Intercom (CCU front): 1 x 5-pin XLR
Dimensions: 433 (W) x 88 (H) x 330 (D) mm
Mass: 10 kg (22lbs)
Power consumption: 300W approx
(AC operation: included SK-HD1200 (CA-HF1200 & CU-HD1200), VF-402 and AUX POWER OUT: 100VA)

© Hitachi Kokusai Electric Europe GmbH. All rights reserved.