hitachi logo
Contact  |  Sitemap  |  Imprint  |  Data protection
 
  Fiber System Configuration (3G/12G) for Z-HD5500 Camera
 

Fiber Camera Adapter
CA-HF1300E

Optical serial digital transmission (HD-SDI 6G)

CCU connector: 1x-type HFOC female connector
( LEMO ), SMPTE-304M-type
Intercom: 2x channel, 5-pin each XLR,
MIC on/off , ENG/PD level control, Tracker level control
Program audio: 2x, PGM audio level controls w / Chnl1 & Chnl2 intercom mix
Teleprompter power output: 1x 5-pin, AC230 V, 100 VA, external prompter R/G Tally drive out
( depending on configuration accessories )
Microphones: Channel 1 & 2 Line or MIC level select
( MENU ), with +48 V phantom power on/off
Return/ Aux switcher: 4-input remote AUX / VF video select connector ( RET control )
Video Inputs & Outputs:
1x HD-SDI1 OUT, 3G-SDI/HD-SDI (for CA-HF1300E),
HD-SDI (for CA-HF1300E-S3)
·3G-SDI (1080p50/59.94) : SMPTE424/425 Level-A
·HD-SDI (1080i50/59.94) : SMPTE292M
1x HD-SDI2 OUT, RET B output : SMPTE292M
1x SD analog teleprompter out sheared with Genlock in
Other I/O:
1x 29-pin (for SA-1000 cable-less interface) (female)
1x 5-pin script lamp DC12 V (1.0 A max) (female)
1x 6-pin VF AUX return (female)
(for use in cranes or extended Head / VF configurations)
1x R05-R8F 8-pin TRUNK RS-422 or RS-232C (option) (female)
1x XLR 4-pin, DC12 V power input (male)
Dimensions: 133 (W) x 189 (H) x 194 (D) mm
Mass: 2.2 kg, 4.8 lbs. approx.
Operating temperature: -10ºC to +45ºC, 14ºF to 114ºF

 

Camera Control Unit
CU-HD1300FE, CU-HD1300FTE, CU-HD1300FE-TX

Optical serial digital transmission (HD-SDI 6G)

CU-HD1300FE (3G, 1080p, 1080i & 720p)
CU-HD1300FTE (3G, 1080p, 1080i & 720p)
CU-HD1300FE-SX (3G/12G 4K, 1080p, 1080i & 720p)


GENLOCK IN:
1x BNC
·B-BST 0.45Vp-p/75 Ω ( loop through )
·HDTV tri-level sync 0.60Vp-p/75 Ω ( loop through )
DIGITAL RET IN 1/2/3/4:
RET.B IN 1/2:
6x BNC, HD-SDI/ SD-SDI
·1080i/720p SMPTE292M
·SD SDI: SMPTE259M-C
PROMPT IN:
1x BNC, VS or VBS 1.0Vp-p/75 Ω ( loop through )
INTERCOM (HEAD SET): 5-pin XLR, -60dBm
COMMUNICATION: 1x D-sub 25-pin,Incom,Tally
·INTERCOM: 0dBm , 600 Ω at 4Wire
0dBu or -15dBu, 200 Ω at 2Wire
(ENG, PROD) Clear-Com and RTS compatible
·PGM: 0dBm/600 Ω
·R/G TALLY IN: Contact or Voltage selectable
REMOTE 1:
1x 4-pin, 1.5Vp-p or 1x D-sub, 9-pin RS-232C
( Switchable )
REMOTE 2: 1x 4-pin, 1.5Vp-p
REMOTE 3: 1x RJ-45
3 times HIGH SPEED OUTPUT LINK A/B/C:
6x BNC
Link A (x2), Link B (x2), Link C (x2)
·1080i/720p : SMPTE292M
HD/SD OUT (1/2/3):
6x BNC, HD-SDI/SD-SDI selectable
(Embedded 2-Chnl audio available)
·1080i/720p : SMPTE292M
·SD-SDI : SMPTE259M-C
PIX/WFM OUT:
2x BNC, HD-SDI/ SD-SDI selectable
(Embedded 2-Chnl audio available)
·1080i/720p : SMPTE292M
·SD SDI : SMPTE259M-C
MIC OUT 1: 1x XLR, 3-pin, 0dBm/ 600 Ω
MIC OUT 2: 1x XLR, 3-pin, 0dBm/ 600 Ω
INTERCOM (HEAD SET):
1x XLR, 5-pin, 0dBu Max +15dB
REMOTE 1: 1x 4-pin, 1.5Vp-p or 1x D-sub, 9-pin RS-232C
( Switchable )
REMOTE 2: 1x 4-pin, 1.5Vp-p
REMOTE 3: 1x RJ-45
COMMUNICATION: 1x D-sub 25-pin
·INTERCOM:
0dBm, 600 Ω at 4Wire
0dBu or -15dBu, 200 Ω at 2Wire
(ENG, PD and PGM)
TALLY OUT (R/G): 1x D-sub 9-pin, Contact 24 Vdc, 10 mA
WFM CONTROL: 1x D-sub 15-pin WFM 0-7, 0/5V
MIC REMOTE: 1x D-sub 15-pin, MIC1,2 Gain
Power supply voltage:
100 to 240 VAC 47 to 63Hz (with auto-sensing mode)
10 kg (22 lbs) approx.
Dimensions: 432 (W) × 88 (H) × 419 (D) mm, 2 RU
Operating temperature: 0ºC to 40ºC, 32ºF to 104ºF
Power consumption:
300 W approx. ( AC operation, including SK-HD1300E-S3, VF-402-S3 and AUX POWER OUT 100VA )


© Hitachi Kokusai Electric Europe GmbH. All rights reserved.